| PAR38 - TUBE | |
![]() 650~900 LUMEN high output LED design
|
True delivered light output:650~900 lm Power consumption:11W CRI:80~85
|
|
750~1100 LUMEN high output LED design
|
True delivered light output:750~1100 lm Power consumption:12W CRI:80~85
|
![]() 1200~1500 LUMEN high output LED design
|
True delivered light output:1200~1500 lm Power consumption:16W CRI:80~85 |
|
Advantage 。Ultra Low energy consumption resulting in greener more sustainable environment. 。Up to 80% savings compared to filament bulbs or 60% compared to florescent tubes. 。Eliminating the cost of repairs and replacement of bulbs or fluorescent tubes. 。Minimal environmental hazard upon disposal. 。Solid state electronics with no filaments or gas tubes 。No harmful Ultra-Violet rays. 。Increased safety with minimal electrical fire hazards. 。Direct replacement of Incandescent Edison base bulbs and lamps. |
|
| PAR38 - CLOVER |
|
Download - SPEC |
![]() |
|
Advantage 。Clover Light Module designed to last 50000 hours with a minimum of 70% Lumen Maintenance 。CRI 80 。True delivered light output 600-800 Lumens 。Power consumption ONLY 11 Watts 。Dimmable to 25% 。Available in Warm White(3000K), Neutral White(4000K) or Cool White (5000K) 。For indoor/non-insulated ceilings only 。Designed for non-IC commercial recessed down-lights or open track fixtures 。Not suitable for completely enclosed down-light housings Housing 。Proprietary Air-Flow Convection○R System designed to minimize heat and maximize LED life by reducing the 。Junction Temperature of the LED when used in environments exceeding 50℃ Electronics 。Worldwide Patented PCB Technology allows heat to directly flow from the LED to the Metal-Core Heat Sink,therefore allowing the LED to operate at cooler temperatures. 。Integrated high efficiency LED Driver and power supply: Power Factor(PFC)>0.94, Efficiency 85% 。Smart Circuitry with Surge and Transient Voltage Protection 。Input Voltage AC 110V/60Hz OR 220V/50Hz 。Precisely controlled constant current draw for stable Optics 。Proprietary Reflector and Optical Diffuser System enables 180℃ no glare uniform lighting without the uncomfortable LED "eye piercing effect"。Increased safety with minimal electrical fire hazards. 。Direct replacement of Incandescent Edison base bulbs and lamps. |